WhatsApp：
+86 180 6828 1557
+86 180 6828 1557
Email：
Annie@changyumech.com
Miaocheng@changyumech.com
Annie@changyumech.com
Miaocheng@changyumech.com
← Back
A typical unit includes:
• Feed hopper and feeding belt
• Cone crusher for medium and fine crushing
• Vibrating screen to grade the product
• Belt conveyors for finished product and return material
• Power system and control system
Cone crushers are known for a large crushing ratio, high efficiency, low energy consumption and uniform product size. That is why they are common in the secondary and tertiary stages of a crushing line, after a primary crusher has reduced the rock to a smaller size.
• Capacity: 150-230 t/h
• Total power: 298 kW, including 250 kW for the main crusher
• Suggested feeding size: below 200 mm
• Hopper capacity: 5 m³
• Total weight: 48 t
• Mobility: crawler travel with wireless remote control
• Protection: automatic lubrication that monitors oil temperature
Because the suggested feeding size is below 200 mm, this cone crushing station normally works after a primary crushing stage. We explain this in the material section below.
How to use these figures:
• Power planning: Use the 298 kW total power when you plan grid supply or a generator. Ask our engineers to confirm the exact electrical needs for your site.
• Transport planning: At 16,800 × 3,650 × 3,950 mm and 48 t, the machine needs a suitable low-bed trailer and a route check. Confirm road limits and port handling before shipment.
• Output planning: Capacity ranges from 150 to 230 t/h. Real output depends on rock hardness, moisture, feed gradation and the product size you need.
1. Feeding. An excavator or loader puts material into the 5 m³ hopper. A feeding belt carries it to the crusher.
2. Crushing. The cone crusher breaks the rock inside its cavity. The laminated cavity design supports high output and good product quality.
3. Screening. A vibrating hanging screen separates the crushed material by size.
4. Conveying. Belt conveyors carry finished product to the stockpile. A return belt sends oversize material back to the crusher.
If your project needs several product sizes, you can add a separate Screening Station to the line. Our team can help you plan the layout.
•Fast site changes. Wireless remote walking lets the operator reposition the machine quickly.
•Handles hard, abrasive rock. The design targets high-hardness, high-abrasion materials and fine crushing work.
•Output and product quality. The cavity and laminated design support high output and a uniform product size.
•Lower wear and running cost. Changyu designs the machine for low maintenance and operating costs.
•Protected operation. Automatic oil temperature monitoring helps protect the crusher.
•Flexible power. External power supply is standard, and a hybrid electric power unit is also described.
In practice, the cavity shape affects three things buyers care about: how much material the crusher takes, how even the final product is, and how fast the liners wear. A cavity that matches your rock type keeps the cost per ton under control.
Questions to ask before you order:
•Which cavity and liner type suit my rock?
•What liner material is used, and what wear life should I expect with my material?
•Which wear parts should I order with the machine?
•What setting range can I use for my target product size?
You can see more models in our Cone Crusher range.
This matters because poor lubrication and overheating are common causes of crusher downtime. Automatic monitoring helps your crew catch problems early, especially on remote sites with limited service support.
Ask your supplier for:
•The recommended oil grade for your climate
•Oil change and filter intervals
•Alarm and shutdown settings
•A maintenance guide in English
For your operation, this means:
•The operator can move the machine from a safe distance.
•You can follow the working face as your quarry or project moves.
•Setup is simpler than building a fixed foundation.
Crawler travel is meant for moves on site. For long distances, plan a low-bed trailer. At 48 t, check ground bearing, slope and access routes before the machine arrives.
Cone crushers handle medium and fine crushing of many ores and rocks. The EX-HP300 is designed for high-hardness and high-abrasion materials. Typical materials for this type of machine include:
•Granite and basalt
•Iron ore and other metal ores
•Quartzite and river gravel
•Limestone and construction aggregate
Final suitability depends on your material. Tell us the rock type, moisture and clay content, because very sticky or clay-rich feed can reduce cone crusher performance.
Feed size matters. The suggested feeding size is below 200 mm. If your blasted rock is larger, add a primary stage first. A Jaw Crusher is the usual choice for this role. The cone station then handles the secondary or tertiary crushing.
If you plan to produce manufactured sand, tell us your target grading and process flow. Many sand-making lines use a cone crushing stage first, so the next machine receives consistent feed. Our team can discuss how the EX-HP300 fits your line.
For hard and abrasive rock, plan your wear parts early. A clear spare parts plan keeps the cone crushing station running and protects your project schedule.
Choose a mobile station if your site changes or you need a fast start. Choose a stationary plant if you will crush at one location for many years at steady output. Some projects combine both.
•External power supply: Suits sites with stable grid power or a generator. Plan for the 298 kW total power.
•Hybrid electric power unit: Suits sites where grid power is weak or unavailable.
Before you decide, compare grid availability, fuel cost and noise rules at your site. Send your local voltage and frequency with your inquiry, so our team can advise on the electrical setup.
•Request a capacity estimate based on your own material.
•Confirm wear parts, spare parts and lead times.
•Clarify packing, shipping terms and delivery time.
•Check after-sales support, manuals and technical help.
•Ask for a working video or an inspection opportunity.
Before you buy, confirm the feed size, power supply, transport route and wear parts for your material. If you want product details, a quotation or a capacity estimate for your rock, contact Changyu Machinery. You can also email Annie@changyumech.com or message us on WhatsApp at +86 180 6828 1557.
Crawler Mobile Cone Crushing Station EX-HP300 | 150-230 t/h
A cone crushing station brings the crusher to the material. Instead of hauling rock to a fixed plant, your team moves the machine to the quarry face, the mine bench or the road project. For buyers who need medium and fine crushing on changing sites, this cuts transport cost and setup time.
The EX-HP300 from Jiangyin Changyu Machinery Co., Ltd. is a crawler mobile cone crushing station with a processing capacity of 150-230 t/h. It puts the feed hopper, cone crusher, vibrating screen and belt conveyors on one tracked chassis. This guide explains the specifications, working process, suitable materials and applications. It also covers what to check before you buy, so you can decide whether this mobile cone crushing station fits your project.
What Is a Crawler Mobile Cone Crushing Station?
A cone crushing station is a complete crushing unit built around a cone crusher. A crawler mobile cone crushing station mounts that unit on a steel track chassis, so the machine can travel on its own over rough ground.A typical unit includes:
• Feed hopper and feeding belt
• Cone crusher for medium and fine crushing
• Vibrating screen to grade the product
• Belt conveyors for finished product and return material
• Power system and control system
Cone crushers are known for a large crushing ratio, high efficiency, low energy consumption and uniform product size. That is why they are common in the secondary and tertiary stages of a crushing line, after a primary crusher has reduced the rock to a smaller size.
EX-HP300 Cone Crushing Station Overview and Key Specifications
The EX-HP300 is built for crushing raw materials in the metallurgical, construction, road building, chemical and silicate industries. It also serves mining, building materials, railway and water conservancy work. Key points for buyers:• Capacity: 150-230 t/h
• Total power: 298 kW, including 250 kW for the main crusher
• Suggested feeding size: below 200 mm
• Hopper capacity: 5 m³
• Total weight: 48 t
• Mobility: crawler travel with wireless remote control
• Protection: automatic lubrication that monitors oil temperature
Because the suggested feeding size is below 200 mm, this cone crushing station normally works after a primary crushing stage. We explain this in the material section below.
EX-HP300 Technical Parameters: Capacity, Power, Weight and Dimensions
The table below lists the EX-HP300 parameters from the product page.| Parameter | EX-HP300 |
| Processing capacity | 150-230 t/h |
| Main power | 250 kW |
| Total power | 298 kW |
| Suggested feeding size | Below 200 mm |
| Feeding belt | 11 kW |
| Main belt | 15 kW |
| Vibrating hanging screen | 6 kW |
| Finished belt | 7.5 kW |
| Transition zone belt | 3 kW |
| Return belt | 5.5 kW |
| Hopper capacity | 5 m³ |
| Total weight | 48 t |
| Dimensions (L × W × H) | 16800 × 3650 × 3950 mm |
• Power planning: Use the 298 kW total power when you plan grid supply or a generator. Ask our engineers to confirm the exact electrical needs for your site.
• Transport planning: At 16,800 × 3,650 × 3,950 mm and 48 t, the machine needs a suitable low-bed trailer and a route check. Confirm road limits and port handling before shipment.
• Output planning: Capacity ranges from 150 to 230 t/h. Real output depends on rock hardness, moisture, feed gradation and the product size you need.
How Does the EX-HP300 Mobile Cone Crushing Station Work?
The EX-HP300 follows a simple flow:1. Feeding. An excavator or loader puts material into the 5 m³ hopper. A feeding belt carries it to the crusher.
2. Crushing. The cone crusher breaks the rock inside its cavity. The laminated cavity design supports high output and good product quality.
3. Screening. A vibrating hanging screen separates the crushed material by size.
4. Conveying. Belt conveyors carry finished product to the stockpile. A return belt sends oversize material back to the crusher.
If your project needs several product sizes, you can add a separate Screening Station to the line. Our team can help you plan the layout.
Key Advantages of the EX-HP300 Crawler Cone Crushing Station
•Moves to the work site. Crawler travel removes the need to haul all material to a fixed plant.•Fast site changes. Wireless remote walking lets the operator reposition the machine quickly.
•Handles hard, abrasive rock. The design targets high-hardness, high-abrasion materials and fine crushing work.
•Output and product quality. The cavity and laminated design support high output and a uniform product size.
•Lower wear and running cost. Changyu designs the machine for low maintenance and operating costs.
•Protected operation. Automatic oil temperature monitoring helps protect the crusher.
•Flexible power. External power supply is standard, and a hybrid electric power unit is also described.
Cone Crusher with Optimized Crushing Cavity
The crusher is the core of any cone crushing station. On the EX-HP300, Changyu uses an optimized cavity design and a laminated crushing design. The aim is high output, good product quality and low wear cost.In practice, the cavity shape affects three things buyers care about: how much material the crusher takes, how even the final product is, and how fast the liners wear. A cavity that matches your rock type keeps the cost per ton under control.
Questions to ask before you order:
•Which cavity and liner type suit my rock?
•What liner material is used, and what wear life should I expect with my material?
•Which wear parts should I order with the machine?
•What setting range can I use for my target product size?
You can see more models in our Cone Crusher range.
Automatic Lubrication and Oil Temperature Monitoring System
The EX-HP300 has an advanced lubrication system. The operator starts it with one click, and the system monitors oil temperature automatically to protect the equipment and extend its service life.This matters because poor lubrication and overheating are common causes of crusher downtime. Automatic monitoring helps your crew catch problems early, especially on remote sites with limited service support.
Ask your supplier for:
•The recommended oil grade for your climate
•Oil change and filter intervals
•Alarm and shutdown settings
•A maintenance guide in English
Wireless Remote Control Crawler Travel for Mountains and Wet Ground
The EX-HP300 is easy to transport. It uses wireless remote-control walking and supports fast transition between positions. It can adapt to complex working environments such as mountains and wetlands.For your operation, this means:
•The operator can move the machine from a safe distance.
•You can follow the working face as your quarry or project moves.
•Setup is simpler than building a fixed foundation.
Crawler travel is meant for moves on site. For long distances, plan a low-bed trailer. At 48 t, check ground bearing, slope and access routes before the machine arrives.
What Materials Can the EX-HP300 Cone Crushing Station Crush?
Cone crushers handle medium and fine crushing of many ores and rocks. The EX-HP300 is designed for high-hardness and high-abrasion materials. Typical materials for this type of machine include:
•Granite and basalt
•Iron ore and other metal ores
•Quartzite and river gravel
•Limestone and construction aggregate
Final suitability depends on your material. Tell us the rock type, moisture and clay content, because very sticky or clay-rich feed can reduce cone crusher performance.
Feed size matters. The suggested feeding size is below 200 mm. If your blasted rock is larger, add a primary stage first. A Jaw Crusher is the usual choice for this role. The cone station then handles the secondary or tertiary crushing.
Applications in Mining, Quarrying, Road Building and Construction
Mining and Metallurgy
Mines use cone crushing to reduce ore before grinding or further processing. A mobile unit lets you follow the bench without building long haul roads.Quarrying and Aggregate Production
Quarries use a cone crushing station to produce graded aggregate for concrete, asphalt and road base.Road, Railway and Water Conservancy Projects
Contractors can set up near the project, crush on site and cut hauling distance. This helps on highways, railways and water works in remote areas.Chemical and Silicate Industries
These industries use crushed raw material as feed for later processing steps. A uniform product size makes that next stage easier to control.Hard Rock Crushing and Sand Making with a Mobile Cone Crusher
Fine crushing is where a mobile cone crusher adds the most value. After primary crushing, the cone stage reduces rock to a smaller and more uniform size. That product can go straight to the stockpile as aggregate, or feed a later stage.If you plan to produce manufactured sand, tell us your target grading and process flow. Many sand-making lines use a cone crushing stage first, so the next machine receives consistent feed. Our team can discuss how the EX-HP300 fits your line.
For hard and abrasive rock, plan your wear parts early. A clear spare parts plan keeps the cone crushing station running and protects your project schedule.
Mobile Cone Crushing Station vs Stationary Cone Crushing Plant
Both options can work well. The right choice depends on your site and your output plan.| Factor | Crawler Mobile Cone Crushing Station | Stationary Cone Crushing Plant |
| Location change | Moves on its own tracks | Fixed; relocation is a major job |
| Setup | Ready to work after positioning | Needs foundations and civil work |
| Hauling cost | Lower, crushes near the source | Material must be hauled to the plant |
| Best for | Changing sites, contract crushing, remote projects | Long-term sites with fixed output |
| Power | External supply or hybrid electric power unit | Usually grid or fixed generator |
| Planning focus | Transport and site access | Civil design and permits |
Power Options: External Power Supply or Hybrid Electric Drive
The EX-HP300 comes with an external power supply as the standard setup. The product page also describes a hybrid electric power unit with a 400 kW engine.•External power supply: Suits sites with stable grid power or a generator. Plan for the 298 kW total power.
•Hybrid electric power unit: Suits sites where grid power is weak or unavailable.
Before you decide, compare grid availability, fuel cost and noise rules at your site. Send your local voltage and frequency with your inquiry, so our team can advise on the electrical setup.
Frequently Asked Questions About the EX-HP300 Cone Crushing Station
What is a cone crushing station?
A cone crushing station is a complete crushing unit built around a cone crusher. It usually includes a hopper, feeder, cone crusher, vibrating screen and conveyors. A mobile version, such as the EX-HP300, adds a crawler chassis so it can move between work areas.What is the capacity of the EX-HP300?
The processing capacity is 150-230 t/h. Actual output depends on material hardness, moisture, feed size and the product size you set.What feed size does the EX-HP300 accept?
The suggested feeding size is below 200 mm. For larger rock, use a primary crusher first.How much power does the EX-HP300 need?
Total power is 298 kW, and the main crusher uses 250 kW. External power supply is standard. The product page also describes a hybrid electric power unit with a 400 kW engine.What are the size and weight of the machine?
The dimensions are 16800 × 3650 × 3950 mm (L × W × H), and the total weight is 48 t. Plan your transport route and port handling with these figures.What should I send to get a quotation?
Send your rock type, feed size, target product size, required output in t/h, power supply details, destination country and project type. This helps our team give you accurate advice and pricing.Get a Quote for the EX-HP300 Mobile Cone Crushing Station for Sale
Jiangyin Changyu Machinery Co., Ltd. supplies mobile crushing equipment and hydraulic breakers. Our website shows 13 years of experience, exports to 14 countries and a logistics center in Riyadh, Saudi Arabia. We also offer door-to-door technical support for installation questions.How to Choose a Cone Crushing Station Supplier
•Ask for full specifications, drawings and a parts list.•Request a capacity estimate based on your own material.
•Confirm wear parts, spare parts and lead times.
•Clarify packing, shipping terms and delivery time.
•Check after-sales support, manuals and technical help.
•Ask for a working video or an inspection opportunity.
Customization and Export Support
Every site is different. If you need a specific configuration, power setup or spare parts package, tell us your requirements. We can discuss shipping terms and export documents for your destination.Conclusion
The EX-HP300 cone crushing station gives miners, quarry owners and contractors a mobile way to handle medium and fine crushing at 150-230 t/h. Crawler travel, wireless remote control, automatic lubrication and flexible power make it practical for hard rock and changing sites.Before you buy, confirm the feed size, power supply, transport route and wear parts for your material. If you want product details, a quotation or a capacity estimate for your rock, contact Changyu Machinery. You can also email Annie@changyumech.com or message us on WhatsApp at +86 180 6828 1557.